VinnieRossi CANTA Integrated Amplifier
All Image Credit: VinnieRossi
Joining the recently released Canta Phono Preamplifier, VinnieRossi has introduced their latest addition to their CANTA Series, the VinnieRossi Integrated Amplifier. Both are designed and manufactured in the USA. This new design combines a Class A tube linestage with a MOSFET output stage. The aluminium chassis is available in a silver finish, is priced at $23,995.00 and comes with a 10 year warranty.
The amplifier is designed around a dual mono Class A 6SN7 dual triode voltage amplification linestage and a high-current, dual-mono Class AB MOSFET power output stage, delivering 125 wpc into 8 ohms and 250 wpc into 4 ohms. All powered by a supply that combines power factor correction with Vinnie Rossi’s own switch-mode architecture and Belleson super-regulation, providing over 1,000W of low-noise power. The design is built around very short signal and power paths and is contained within a chassis that is precision-machined from a solid block of aluminium, that provides thermal management, electromagnetic shielding and resonance control.
CANTA’s front-panel high resolution LCD and two Swiss rotary encoders with 24 and 48 positions, provide an intuitive interface for adjusting gain and balance independently for each input, engaging Home Theater Bypass, setting display brightness, and accessing additional system preferences. Volume uses a 100-step resistor ladder, and there are four inputs. Gain (LOW / MED / HIGH) and left-right balance (12 steps) are stored independently for each input. Frequently used functions remain immediately accessible, while deeper settings are menu driven.
Control is also available using the CANTA infrared remote, also machined from a solid block of aluminum.
Rear panel signal connectivity includes; 2 x stereo RCA and XLR line level inputs, 1 x stereo RCA/XLR line level output and 1 x stereo pair of gold plated speaker binding posts.
The remaining two models in the CANTA range, the Preamplifier and Stereo Power Amplifier are due to be released in October 2026.
Additional Features At A Glance:
- Controls:
- Volume Control: 100-step resistor ladder for smooth, precise volume adjustment.
- Input Selection: Select from four line-level inputs.
- Gain: Selectable LOW, MED, or HIGH gain setting for each input.
- Balance: 12-step left-to-right adjustment for precise stereo balance.
- Input Memory: Gain and balance settings are saved independently for each input.
- Home Theater Bypass: Provides direct integration with an AV processor or other external volume-controlled source.
- Front Panel:
- Left Knob: 24-position Swiss rotary encoder with integrated pushbutton.
- Right Knob: 48-position Swiss rotary encoder with integrated pushbutton.
- Display: High-resolution LCD.
- Rear Panel:
- Line-Level Inputs: Two pairs of balanced XLR inputs and two pairs of single-ended RCA inputs.
- Line-Level Outputs: Volume-controlled balanced XLR and single-ended RCA outputs.
- Speaker Outputs: Premium 5-way binding posts, gold-plated.
- USB-C: For firmware updates.
Technical Specifications:
- Output Power into 8Ω: 125W RMS per channel
- Output Power into 4Ω: 250W RMS per channel
- THD+N: <0.1%, 20Hz–20KHz
- Frequency Response: 5Hz–100KHz, ±0.5dB
- Signal-to-Noise Ratio: >100dB, 20Hz–20KHz
- Input Impedance: 20KΩ
- Gain: Adjustable: LOW = 22dB, MED = 28dB, HIGH = 34dB
- Line Output Impedance: <100Ω
- Speaker Output Impedance: <0.05Ω
- AC Mains: 100–264V AC, 50–60Hz
- Weight: 22 lb (10Kg)
- Dimensions (including knobs, jacks, and feet): 16.25 x 12.75 x 2.75 in (413 x 324 x 70mm)
- Remote Dimensions: 3.94 x 1.97 x 0.55 in (100 x 50 x 15mm)
Pricing:
- UK: £TBA
- US: $23,995.00
- EU: €TBA
For more information visit the VinnieRossi web site.
Related posts:
