Goldmund Telos 800 Stereo Power Amp – Quick Look


Goldmund Telos 800 Stereo Power Amp – Quick Look

Goldmund Telos 800 Stereo Power Amp - Quick Look

All Image Credit: Goldmund

It appears that Goldmund is ‘on a roll’ pushing one product after another out in recent months. This latest release is the Telos 800 stereo power amplifier, coming right on the heals of the Telos 690 integrated ampMimesis Reference preamp and Telos 2800 mono amp.

The 800 is quoted as delivering 300 watts (RMS) per channel into eight ohms, or 390 watts into four ohms, both channels driven. Ample power is available from its 3,200VA toroidal power transformer and 93,600 μF capacitor bank. Claimed IMD and THD+N distortions of less than 0.05 per cent with a noise floor below 3 μV from 20Hz to 20KHz are correspondingly impressive. The 800 supports a dynamic range of 110 dB, together with a damping factor of 600 at 1 kHz into 8 Ω.

Goldmund Telos 800 Stereo Power Amp - Quick Look

Rear panel connectivity includes; two balanced XLR and two unbalanced RCA connectors, one RCA S/PDIF digital input and output, four speaker binding posts and two Goldmund speaker 4B type connectors.

Finally the Telos 800 is available in its iconic silver-grey finish, though a black version is available on demand. And for a bespoke touch, the silver-grey ring on the top left of the front chassis can be replaced with a gold one.

Specifications:

  • Output power Maximum power (62368-1):
    • 2 x 300 Wrms on 8 Ω / 1 % THD
    • 2 x 390 Wrms on 4 Ω / 1 % THD
  • Distortion:
    • IMD (SMPTE), unloaded: < 0.05 %
    • THD+N, unloaded: < 0.05 % from 20 Hz to 20 kHz at 30 Vrms output
  • Output noise floor: Analogue input terminated with RCA Shorting Caps, unloaded: < 3 μV from 20 Hz to 20 kHz
  • Gain: 35 dB
  • Dynamic range: 22 kHz measurement bandwidth (flat), true RMS unloaded: 110 dB
  • Damping factor: 600 at 1 kHz / 8 Ω
  • Input levels:
    • Max level before clipping, Analogue input: 1 Vrms
    • Max level before clipping, Digital input: -6 dBFS
  • Output levels: Max level before clipping, 1 % THD, unloaded: 170 Vpp
  • Rear panel:
    • 1 x Power cord: universal socket 3 lugs1 x Main fuse (8 A slow-blow for 115V & 230 V)
    • 1 x Green-yellow AC earth binding post (with bridge connection)
    • 1 x Black ground binding post (with bridge connection)1 x Ground/Earth lift switch
    • 4 x output binding posts (2x red & 2x black ; Left & Right speaker Output)
    • 2 x output Goldmund speaker 4B type connector (Left & Right speaker
      Output)
    • 2 x Analogue RCA input (unbalanced connector, Left & Right)
    • 2 x Analogue XLR input (balanced connector, Left & Right)
    • 1 x Digital input and output RCA connectors
    • 1 x RS232 command connector
  • Power supply:
    • Nominal line voltage: 115 V or 230 V, 8A slow-blow fuse Input voltage range: +/- 10 %
    • 3200 VA Toroidal Power Transformer
    • Capacitor bank: 93,600 µF
  • Rated power consumption, IEC 62368-1: 1/8 Output Power at 8 Ω: 335 W
  • Dimensions: 44 W x 32 H x 45.2 D (cm) – 17.3 W x 13 H x17.8 D (inch)
  • Weight: 57 kg

MSRP:

  • US: $85,000.00 approx.
  • UK: £66,500.00

For more information visit the Goldmund web site.

Related posts:

Leave a comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.