Chord Releases Ultima Integrated & BerTTi Amplifiers


Chord Releases Ultima Integrated & BerTTi Amplifiers

All Image Credit: Chord Electronics

UK designer and manufacture of hifi equipment, Chord Electronics in Kent, has just announced the pre-order of two new products, the Ultima Integrated 125W amplifier and its BerTTi stereo 75W power amplifier.

The new Ultima Integrated amplifier is the first and only full-width model in the company’s integrated range for seven years and follows on from a line of full-width Ultima-technology power amplifiers including; the original flagship Ultima mono power amplifier (780W), the Ultima 2 (750W) and 3 (480W) mono power amplifiers and Ultima 5 (350W) and 6 (180W) stereo power amplifiers.

The Ultima Integrated amplifier features the latest dual-feed-forward error-correction topology, which monitors and immediately corrects signals before the output stage and includes both proprietary MOSFET’S and their legendary proprietary ultra-high-frequency power supplies.

Connectivity includes; one balanced stereo XLR and three unbalanced stereo RCA line inputs (no phono input). Outputs include; one balanced stereo XLR line level and one balanced stereo XLR AV bypass. All inputs are individually buffered and provide RF noise filtering. Input selection is via microprocessor controlled sealed relays with a trigger I/O for on/off remote switching.

Chord Releases Ultima Integrated & BerTTi Amplifiers

The Ultima’s case is precision machined from solid aircraft-grade aluminum, with its front 28mm thick panel sharing the same design as the Ultima PRE 3 preamp. The upper panel is a vented design and contains a dimmable LED light ring. The case finish is available in either Jett Black or Argent Silver finishes but maybe ordered with a highly polished black acrylic side block option at no extra cost.

Chord Releases Ultima Integrated & BerTTi Amplifiers

Control is via the two illuminated front panel knobs, one for volume and input selection, the other a combined balance and AV bypass control and/or the supplied IR remote. With the illuminated and dimmable, central panel polychromtic sphere being used as both an on/off button and indicating playing status.

The BerTTi power amplifier is a table-top, fully balanced 75W stereo power amplifier, that also benefits from the latest dual-feed-forward error-correction topology and proprietary ultra-high-frequency power supplies. Additional features include; two modified power supplies, an additional auxiliary power rail for the front end and custom-made MOSFETs. Connectivity includes; both balanced XLR and unbalanced RCA stereo gold plated inputs, gold-plated loudspeaker terminals and a 10A IEC power inlet.

Chord Releases Ultima Integrated & BerTTi Amplifiers

Chord Releases Ultima Integrated & BerTTi Amplifiers

The case is again precision-machined from solid aircraft-grade aluminum and comes in a choice of Jett Black or Argent Silver.

Features At A Glance:

Ultima Integrated Amplifier:

  • All-new design
  • Dual feed-forward error correction
  • AV bypass
  • Proprietary MOSFET
  • HF Switch mode power supply
  • Fully Balanced Circuitry
  • Solid Aluminium Chassis

BerTTi Power Amplifier:

  • Trickle down ULTIMA tech
  • Fully balanced system
  • HF Switch mode power supply
  • Proprietary MOSFET
  • Compact design
  • Solid Aluminium Chassis

Technical Specifications:

Ultima Integrated Amplifier:

  • Power output: 125 W into 8Ω
  • Frequency response: 10 Hz-200 kHz +/- 3 dB
  • THD: 0.01 % 20 Hz-20 kHz
  • Signal-to-noise ratio: 90 dB on all inputs
  • Input impedance: 100 kΩ
  • Input maximum voltage: 3 V RMS
  • Output maximum voltage: 35 V RMS
  • Gain: 21dB
  • Channel separation: 100 dB
  • Operation voltage: 80-250 V AC auto-switching
  • Power consumption: 200 W

BerTTi Power Amplifier:

  • Output Power: 75 W into 8 Ω
  • Frequency Range: 5 Hz-100 kHz +/- 0.5 dB
  • THD: 0.008%
  • Signal-to-Noise Ratio: 87 dB (A-weighted)
  • Input Impedance: 100kΩ Unbalanced/Balanced
  • Input impedance: 0.78 V
  • Gain: 30dB
  • Dimensions: 59 mm (H) 235 mm (W) 256 mm (D)
  • Weight: 3.75kG

Availability:

September 2023.

MSRP (TBC):

  • Ultima Integrated Amplifier
    • US: $11,250.00
    • UK: £8,500.00
    • EU: €9,500.00
  • BerTTi Power Amplifier
    • US: $5,250.00
    • UK: £3,995.00
    • EU: €4,995.00

For more product information visit the UK Chord Electronics web site:

Related posts:

Leave a comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.