Andover Audio SpinDeck 2 Turntable – First Look
This post contains affiliate links. Please see my full disclosure here
All Image Credit: Andover Audio
If your looking to get into vinyl and need a low cost turntable, cartridge and phono amplifier look no further. Andover Audio of Massachusetts have you covered. Their new Andover SpinDeck 2 turntable builds upon the legacy of the original SpinDeck turntable offering improved performance and operation all at a modest price.
This 2023 two speed, belt drive, SpinDeck 2 adds electronic speed control and end-of-the-record automatic shut-off and arm return. Automatically lifting the tonearm from the armrest will start the platter, and returning the tonearm will stop it.
The SpinDeck 2 comes with a built-in RIAA Phono preamp that can be bypassed if not required, making it compatible with virtually any system. While the aluminum tonearm comes with a pre-installed Audio-Technica AT3600 MM phono cartridge. Its standard 1/2″ cartridge mounting and arms fully adjustable counterweight allows the user to substitute other cartridges.
Features at a glance:
- Tonearm lifts and returns at the end of the record for Auto-Off function.
- Quiet Belt-Drive isolates vibrations from your music.
- Cast, machined aluminum platter with damped silicone rubber mat.
- Electronically stabilized DC motor assures unwavering speed.
- Light-tracking Audio Technica magnetic cartridge comes pre-installed.
- Built-in switchable Phono preamplifier – Works with any system.
- Easy Set-up. You’ll be spinning LP’s in minutes.
Technical Specifications:
- SpinDeck 2
- Nominal speeds – 33/45 r.p.m. +/-2%
- Wow and flutter – 33: <0.20% 45: <0.20%
- Signal to noise – >67dB A-Weighted
- Effective tonearm length – 8.5” (214,5mm)
- Overhang – 22mm
- Power consumption – 1.5W
- Power adapter – Universal 100 – 240VAC / 50-60Hz
- Dimensions (W x H x D) 420 x 119 x 340mm
- Weight 10 lbs. / 4.5kg
- Included Audio Technica AT3600 phono cartridge
- Frequency range 20-20.000Hz
- Channel separation 24dB/1kHz
- Channel Balance <1.5dB
- Output voltage 4.2mV @ 1kHz, 5cm/sec
- Recommended load impedance 47Kohms/200-300pF – MM-input
- Stylus type .0006” Conical bonded diamond
- Recommended tracking force 2.5 – 3.5 grams
- Weight 5.7g
- Replacement Stylus ATN3600L Stylus
For more information visit the Andover Audio web site.
For more information on turntables, arms and cartridges, check out these posts: