From Vinyl To Plastic

One man's quest for audio perfection

Lentek

Very Low Noise Lentek Battery Power Supply – DIY Introduction So after decades of never knowing whether my Lentek head amplifier alkaline PP9 DC battery was OK I decide to replace it with a NiCd source that I could monitor its voltage and charge and discharge as required. It took […]

Very Low Noise Lentek Battery Power Supply – DIY

January 19, 2022 in Equipment Rebuilds and Upgrades tagged Analog Power Supplies / Battery Power Supply / DC Power Supply / DIY / Head Amplifier / Lentek / Low Noise / NiCd / Nickel Cadmium / Very Low Noise by fromvinyltoplastic

Lentek Head Amplifier Adjustable Loading — Lentek Head Amplifier Adjustable Loading The original three loading positions that I added to this head amplifier worked just fine, but I wanted to see if I could make it even more versatile and flexible. I initially tried using a linear 1000 ohm dual gang 20% & 10% tolerance plastic film […]

Lentek Head Amplifier Adjustable Loading

August 23, 2020 in Equipment Rebuilds and Upgrades tagged Head Amplifier / Lentek / upgrade / Variable Loading by fromvinyltoplastic

Lentek Head Amplifier Upgrade Designed by Peter Baxandall for use with the Lentek Entre moving coil cartridge, this little gem has a lot to offer when paired with other moving coil cartridges and a high quality phono pre-amp like the MX-VYNL. With +28dB of gain and a low nose figure the […]

Lentek Head Amplifier Upgrade

July 12, 2020 in Audio / Equipment Rebuilds and Upgrades tagged Adjustable Cartridge Loading / Head Amplifier / Lentek / Moving Coil / Moving Coil Cartridge by fromvinyltoplastic

lentek head amp — MX-VYNL & Lentek Head Amp Introduction. So after being very happy with my MX-VYNL and Hana pairing for a while now, I decided to modify my rebuilt Lentek head amp to correctly load the Hana and see how it would sound when paired to the MX-VYNL running in unbalanced moving […]

MX-VYNL & Lentek Head Amp

May 31, 2020 in Audio / Equipment / Equipment Rebuilds and Upgrades / Reviews tagged Head Amplifier / Lentek / MX-VYNL / Phono Pre-Amplifier by fromvinyltoplastic

Ariston RD11E - My Loss! — Ariston RD11E – My Loss! I thought that after 40 years I would just relate a heart felt regret to my readers and how I got onto the audiophile bandwagon. At the tender age of 23 and an entrenched “radio ham”, I visited a friends home amateur radio shack and […]

Ariston RD11E – My Loss!

March 28, 2020 in Personal Views & Comments tagged Ariston RD11E / Ariston RD11S / Entre / Hana SL / Lentek / Maudant Short / MS500 / MS600 / Sugden BC1 / Sugden SAU2 by fromvinyltoplastic

Lentek Entre 1 Phono Cartridge History As I am close to replacing my steadfast 40+ year old Entré 1 cartridge I thought that I would just pen a few words about its pedigree before it takes a ‘back seat’. The above image is of my beloved Lentek Entré 1 with […]

Lentek Entre 1 Phono Cartridge History

May 5, 2019 in Audio / News tagged Entre / Head Amplifier / Lentek / Matsudaira / Moving Coil / My Sonic Lab / Phono Cartridge / Soltear Acoustics by fromvinyltoplastic

Thorens TD160S, Hadcock GH228S and Lentek Head Amp Upgrade and Rebuild — Thorens TD160S, Hadcock GH228S and Lentek Head Amp Upgrade and Rebuild For those wanting to improve their turntable systems this is a brief overview of my Thorens TD160S, Hadcock GH228S and Lentek Head Amp upgrade and rebuild. I have owned my Thorens TD160 Super, Hadcock GH228 Super, Lentek Entre 1 […]

Thorens TD160S, Hadcock GH228S and Lentek Head Amp Upgrade and Rebuild

August 7, 2017 in Audio / Equipment Rebuilds and Upgrades tagged Cartdridge / Entre / Falcon PSU / GH228 / Hadcock / Head Amplifier / Lentek / Nitty Gritty / Phoenix / RoadRunner / Thorens by fromvinyltoplastic